Click image to view full size image
Some matters related to the attention of the working environment of the medium speed multi cut wire edm
1. Choose the place without dust, avoid leaving many passages beside the medium speed multi cut wire edm;
▲ The characteristics of the wire-cutting discharge machine itself, there is dust in the air, which will make the machine's wire rod subject to serious wear and tear, thus affecting the service life;
▲ Medium speed multi cut wire edm belongs to computer control, the disk used by the computer is quite strict to the dust in the air, when there is dust inside the disk, the disk will be damaged, and also damage the hard disk;
▲ Medium speed multi cut wire edm itself sends out a lot of heat, so the electrical cabinet needs to be changed often, if there is too much dust in the air, it will be attached to the accumulation of each electrical component in the process of air exchange, resulting in poor heat dissipation of the electrical components, which leads to the circuit boards being burned out. Therefore, the machine dust net should be cleaned frequently.
Choose a place that can withstand the weight of the machine;
Choose the place where there is no vibration and shock incoming, WEDM is a high-precision processing equipment, if there is vibration and shock in the place where it is placed, it will cause serious damage to the machine, which will seriously affect its processing accuracy, shorten its service life, and even lead to the scrapping of the machine.
Meet the space size required by the wire-cutting machine tool;
Choose the place with small temperature change, avoid direct sunlight through the window and top window glass and the place near the heat flow.
The products of high precision parts machining need to be processed at a constant temperature, generally 20℃ room temperature;
Since the medium speed multi cut wire edm itself generates considerable heat when working, if the temperature changes too much, it will have a serious impact on the service life of the machine.
Choose the shielded house: because the wire-cutting discharge process belongs to the arc discharge process, in the arc discharge process will produce strong electromagnetic wave, which will cause harm to human health, and at the same time will affect the surrounding environment.
Choose a plant with good ventilation and spaciousness so that the operator and the machine can work in the best environment.
https://www.longkai-cnc.com/